PCIe to 2.5G POE Ethernet Card

Part number                                                         STC-PN0002LM (Intel I225LM Chip)

Warranty                                                              3-years

Color                                                                    Green

Interface                                                               RJ45 With POE

1 x User Manual

1 x Low-profile bracket

Single gross weight: 0.30 kg    

Driver Downloads: http://www.mmui.com.cn/data/upload/image/i225.zip                     

PCIe to 2.5G POE Ethernet Card, Gigabit Network Card PCI-Express to Ethernet Card PCIE to 2.5G Single Port RJ45 Gigabit PCIe X1 PoE+ 802.3At I225 Chip.

PCIe x1 to 10 /100/1000M/2.5G POE Ethernet Card, Supports 1-Lane 2.5G/5Gbps PCI Express Bus, Support 2.5G and 1G Lite mode, Supports PCI Express x1, x4, x8 or x16 socket, 30W maximum with DC 12V over PCIe slot or SATA 15PIN.

The 10/100/1000M/2.5G Ethernet controller combines a four-speed IEEE 802.3 compliant Media Access Controller (MAC) with a four-speed Ethernet transceiver, PCI Express bus controller, and embedded memory. With state-of-the-art DSP technology and mixed-mode signal technology, it offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. Functions such as Crossover Detection and Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented to provide robust transmission and reception capability at high speeds.

The 10/100/1000M/2.5G Ethernet controller supports the PCI Express 2.1 bus interface for host communications with power management, and is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet and the IEEE 802.3bz specification for 2500Mbps Ethernet.

The 10/100/1000M/2.5G Ethernet controller is fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) features, and supports IEEE 802.1P Layer 2 priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN) and IEEE 802.1ad Double VLAN. The above features contribute to lowering CPU utilization, especially benefiting performance when in operation on a network server.

Features

Supports PCI Express revision 3.1

Supports 1-Lane 2.5G/5Gbps PCI Express Bus

Support 2.5G and 1G Lite mode

Supports PCI Express x1, x4, x8 or x16 socket

Integrated MAC/PHY supporting 10BASE-Te, 100BASE-TX, 1000BASE-T and 2500BASE-T 802.3 specifications

IEEE 802.3u auto-negotiation conformance

Half duplex operation at 10BASE-Te and 100BASE-TX

Automatic polarity correction

Error correcting memory (ECC) in packet buffers

Flow control support: send/receive PAUSE frames and receive FIFO

Supports PXE

Support Wake on LAN

Interrupt moderation, VLAN (802.1Q & 802.1P), TCP/IP checksum offload, segmentation offload

Time Sensitive Network (TSN): IEEE 1588/ 802.AS Rev, 802.1Qav, 802.1Qbv

Supports Interrupt moderation, VLAN (802.1Q & 802.1P), TCP/IP checksum offload, segmentation offload

Supports IEEE 802.3、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3az、IEEE 802.3bz

Supports IEEE802.3az(Energy Efficient Ethernet)

Supports IEEE802.3af,IEEE802.3at

Supports IEEE802.3bz(2.5GBASE-T)

Supports Full Duplex flow control(IEEE 802 .3x)

Supports Size of jumbo frames 9.5 KB and without TSN

30W maximum with DC 12V over PCIe slot or SATA 15PIN

System Requirements 

Windows 10S/10RS5+

Ubuntu 19.04 or higher

PCI Express-enabled system with an available PCI Express slot

Package Contents

1 x PCI-Express to 10 /100/1000M/2.5G Ethernet Card

1 x User Manual

1 x Low-profile bracket