-
USB Extension Cable USB extension cable is mainly composed of two parts: one cable and two USB ports. The interfaces are connected to the two ends of the network cable and can be any combination of USB male or USB female as required. USB extension cable introduction USB extension cable wi...Read more »
-
Network cable crystal head connection There are two methods for connecting the crystal head of the cable, one is the direct connection and interconnection method, and the other is the cross-connection method. The crossover approach is: One end adopts the 568A standard and one adopts the 568B sta...Read more »
-
Homemade USB extension cable with network cable 1, the choice of network cable. If you need to create a long length of extension cable, the material of the cable is required, as follows: 1 Use a multimeter test. Shave the network cable and use the two ends of the test leads to touch both ends of...Read more »
-
It is with great pleasure STC-CABLE is able to announce that we have passed our three year ISO re-certification audit as well as successfully transitioned to the new ISO 9001:2015 standard. The leadership team, led by our Quality Manager Peny Tang, embarked on a journey to identify gaps that woul...Read more »
-
SATA 3.0 CABLE Compared to SATA 2.0, the ATA 3.0 final specification doubles the bandwidth to 6Gb/s. At the same time, a number of new technologies have been added, including the addition of new NCQ instructions to improve transmission technology and reduce the power consumption required for tran...Read more »
-
SATA SATA (Serial Advanced Technology Attachment) is an industry-standard serial hardware driver interface and is a hard disk interface specification jointly proposed by Intel, IBM, Dell, APT, Maxtor, and Seagate Corporation. In 2001, the Serial ATA committee, consisting of Intel, APT, Dell, IBM,...Read more »
-
USB version 1>USB 1.0 USB 1.0: Released in January 1996. The specified data transmission rate is 1.5 Mbit/s (Low-Speed) and 12 Mbit/s (Full-Speed). No prediction and pass detection function. Only a very small number of such devices are on the market. USB 1.1: Released in September 1998. Amende...Read more »
-
Mechanical and electronic standards USB signals are transmitted using twisted pairs labeled D+ and D-, respectively, and they each use half-duplex differential signals and work together to counteract electromagnetic interference on long wires. 1. Standard USB connector contacts Contacts Fun...Read more »
-
Standard USB On-The-Go The USB Implementers Forum (USB-IF) is responsible for the development of the USB standard. Its members include: Apple Computer, Hewlett-Packard, NEC, Microsoft, and Intel. At the end of 2001, the USB-IF announced the USB 2.0 specification. Like the previous USB 0.9, USB 1....Read more »
-
USB CABLE Universal Serial Bus (English: Universal Serial Bus, referred to as "USB") When multimedia computers were first introduced, the transmission interfaces of external devices were different. For example, a printer can only connect to the LPT port, a modem can only connect to RS232, and a ...Read more »
-
High-quality gray cable is in accordance with the provisions of their industry norms cable rules, line order, line color, line number, for moving parts and activities within the area of data transmission, such as the computer internal motherboard to connect hard drive, optical drive data line...Read more »
