Jst GH 1,25 1,25 mm žingsnio laido ir plokštės jungties laido laidai

Kontaktinis žingsnis: 1,25 mm

Kontaktų skaičius: 2-15 pozicijų

Srovė: 1A (AWG nuo 26 iki #30)

Suderinamas: Cross JST GH jungčių serija

Vardinė įtampa: 150V

Temperatūros diapazonas: -25°C~+85°C

Atsparumas kontaktui: 30 m Omega Max

Izoliacijos varža: 100M Omega Min

Atspari įtampa: 500V AC/min

1,25 mm 1,25 mm JST GH laido ir plokštės jungties žingsnis

1>The GH 1.25 mm Pitch connector is a low-profile connector designed for Plasma Display Panels (PDPs), Liquid Crystal Displays (LCDs), or other small-sized equipment.

2> Kaip ir GH serija, GH 1,25 mm žingsnio jungtys taip pat dažnai naudojamos mažuose lenktyniniuose dronuose.

3>STC offers a crimp-style lock and a configuration that prevents users from inverted insertion.

4>Pateikia iki 1,0 A srovės vieno kontakto, skirto American Wire Gauge (AWG) Nr. 26, Nr. 27, Nr. 28, Nr. 29, Nr. 30

5> Tinka tiek energijos perdavimo sistemoms, tiek važiuoklės laidams.

Siūlo dizaino lankstumą, pasirenkant iš įvairių konfigūracijų

Sukurta taip, kad būtų taupoma erdvė, o tai leidžia žymiai sutaupyti PCB, STC gamina skirtingus modelius, skirtingų matmenų, su viršutinio arba šoninio įėjimo konfigūracija.

The top entry configuration only consumes a height of 7.3 mm and a depth of 4.25 mm. Whereas the side entry configuration consumes a height of 7.15 mm and a depth of 4.35 mm.

Variation in the Number of Circuits

In addition to the above flexibility in configurations of the 1.25mm pitch connector, STC also offers this connector with a different number of circuits ranging from 2 to 20 circuits which would suit your specific needs.

Patvarus gaminio dizainas ir saugi fiksavimo konstrukcija

No alloy was used in fastening the wires to the board but the use of a crimping method was, which made it more flexible and mechanically stronger. The crimps are well-engineered to be air-tight, preventing oxygen and moisture from reaching the metals and causing corrosion. Thus, the connector can be easily removed from the head without holding the wires. Furthermore, it prevents the cables from being easily disconnected due to entangled routing or heavy loads.

Suderinamumas su SHL jungtimis

The GH 1.25mm connector has compatible features with the SHL connector, so in the absence of an SHL connector, the GH 1.25mm can be utilized as a replacement.

Optimizuota saugos funkcija elektros smūgio pavojaus atveju

With its improved product enhancement, the connector has the capability of withstanding a voltage of 500V AC per minute, which means that the insulation is sufficient to protect the user from electrical shock, overheating, and fire.

Medžiaga ir apdaila

Antraštės kontaktas pagamintas iš vario lydinio, padengto fosforine bronzos medžiaga. Korpusas pagamintas iš PA UL94V-O natūralaus dramblio kaulo. Šiuos korpusus galima įsigyti su iškyšomis arba be jų.

The solder tab is made up of brass, copper undercoated, or tin-plated.

Temperature range, insulation, and contact resistance

1,25 mm jungties temperatūros diapazonas yra nuo -25 laipsnių Celsijaus iki +85 laipsnių Celsijaus. Šis diapazonas pagrįstas temperatūros kilimu didėjant srovei.

Insulation resistance and contact resistance are 100 Megaohms per minute minimum and 50 Megaohms maximum, respectively.

Taikoma važiuoklės laidams ir galios perdavimo laidams

The 1.25mm Pitch Connector can be used for AC and DC operations with a rated current of 1.25 amperes and 50 Volts. It is applicable in both chassis wiring and power transmission wiring with a maximum amperage of 1.0 amp and 0.2 Amp, respectively.

Tinkami naudoti smulkūs laidai

Jungtį galima naudoti su AWG laidais nuo #26 iki #30. Tai taikoma vielos skersmenims nuo 0,2 mm iki 0,4 mm.

Uždengta antraštė

Jungties kaiščio antraštė yra apvyniota plona plastikine kreipimo dėže, kad būtų išvengta kabelio prijungimo nesėkmių, be to, ji gerai nukreipia jungiamąją jungtį.

Dvigubo U formos lizdo sekcija

The Twin U-slot section or twin-axial cable has a pair of insulated conductors where the conductors run parallel with one another. This is commonly used in high-speed balanced-mode multiplexed transmission in large computer systems, in which the signals are carried by both conductors in a U-shaped configuration. This ensures reliable connection and provides greater noise immunity.

Tinka mikroelektronikos sistemoms

1.25 mm pitch serves as the best choice for densely crowded electronics systems for its small, square-edged configuration, and ruggedized and shock-resistant feature.

Caters Power, Signal, and Grounding Contact Needs

The 1.25 mm Pitch connector can either stand as power contacts, signal contacts, or both as power and signal contacts or a signal and grounding contact. The wiring harness interconnects the PCB to various components that send signals and power to other electronic devices.

Saugus ir patikimas

GH 1.25mm pitch connectors ensure safety, system protection, and performance with their bonded metallic conduits and multiple grounding points preventing fire hazards, component damage, overheating, and possible electrocution.

The product does not contain restricted chemicals in concentrations not comply with ROHS standards. Thus, for its components, the products can be worked upon at high temperatures required by lead-free soldering.

Plačiai naudojamas elektroninėje įrangoje

It can be used in all types of PCB assemblies, projectors, and high power applications, computers, inkjet, notebook PCs, ATMs, LCD, security systems, digital cameras, cell phones, scanners, medical equipment, fingerprint machines, taximeters, automobiles, power source for communication devices and many more.

Bandymo įranga

Testing equipment is often used for quality control of products, experimentation, and R&D. STC provides 1.25 mm pitch connectors for the following testing equipment:

• - multimetrai
• - ommetras
• - voltmetras
• -laboratorinių tyrimų įranga

Automobilių pramonė

Driving requires not only the physical coordination of your hands and thoughts but also high-quality automotive parts that are fine-tuned and in good condition. The combination switch is one thing because it allows you to turn the headlights on and off, maneuver the headlight beam function, and turn the signal lights on.

STC offers a 1.25mm pitch wire to board connector used in the combination switch and other automotive components such as the following:

shifters

steering

instrument panels