Motherboard Slot Plate Parallel Panel DB-25 Female to 26 Pin IDC Socket Flat Cable

Warranty                                                              3-years

Cable Shield Type                                               NON

Connector Plating                                                G/F

Number of Conductors                                        25Pin and 25Pin (PH=1.27mm)

Connector B                                                        1 - IDC-2.54-2*13Pin Female

Color                                                                    Gray

Connector Style                                                   Straight

Wire Gauge                                                          28 AWG

DB25 to IDC 26 Pin Cable, Motherboard Slot Plate Parallel Panel DB-25 Female to 26 Pin IDC Socket Flat Cable

25Pin Parallel LPT Printer Port Bracket to Motherboard 25 Pin Female Cable Adapter PC, 25pin Motherboard Printer bracket.

1> All copper core DB25P female to IDC36P female baffle line 28CM;

2> Interface: 25 female, parallel port baffle.

3> Specifications: standard chassis parallel port baffle line, line length 28CM

4> The DB25 printer port on the new motherboard is no longer available, but the parallel port printer, dongle and the like are still needed, and this problem can be solved by using this baffle cable

5> It is required to have a double-row 25-pin LPT1 header on the motherboard

Notice:

1> When connecting the LPT1 pin header on the main board, do not insert it backwards. The line with a red border is the No. 1 line. The corresponding No. 1 pin on the main board is usually marked with a red line as shown above.

2> In the motherboard BIOS, the printer port mode (parallel port mode), please set it to Normal

Attached is the description of the working mode of the print port on the motherboard:

1>parallel port mode is called parallel port mode, including: SPP, EPP, ECP, ECP+EPP

2> Normal SPP (Standard Parallel Port, standard parallel port) mode is compatible with all parallel devices, and the speed is the slowest. recommend
ECP (Extended Capabilities Port) uses DMA protocol to send data and can provide symmetrical two-way communication with a speed of 2.5Mbit/s. With the help of FIFO (First Input First Output, first-in-first-out queue), ECP is very beneficial to devices with large data volumes such as scanners and printers.

3> EPP (Enhanced Parallel Port, Enhanced Parallel Port) uses the existing parallel port to provide asymmetric two-way communication, which is more suitable for parallel port drivers. The BIOS also supports ECP+EPP mode at the same time, if you don't have one of these devices, you will waste an IRQ.