Single Port M.2 A+E key Gigabit Ethernet Card

Applications:

M.2 A+E Key
Supports 10/100/1000 Mbps
The gigabit single-port RJ45 network card is based on the original Realtek RTL8111H, which is designed to be widely used in small PCs, industrial computers, single board computers, digital multimedia, and other devices that contain M.2 interface slots.
The gigabit network card supports speeds up to 1000 Mbps, providing significantly faster data transfer rates compared to standard Ethernet connections. It ensures a consistent and uninterrupted network connection, reducing the chance of signal interference.
Single port Ethernet NIC adapter is widely used in industrial computer, embedded computer, single board computer, digital multimedia and other internet equipment.

Product Detail

Product Tags

Technical Specifications
Warranty Information
Part number STC-PN0031 Warranty 3-years
Hardware
Connector Plating Gold-plated
Physical Characteristics
Port M.2 (A+E Key) Color Green Interface 1 Port RJ-45
Packaging Contents
1 x Single Port M.2 M+B key Gigabit Ethernet Card (Main card & Daughter card) 2 x Connecting Cable 1 x User Manual 1 x Low-profile bracket Single gross weight: 0.42 kg Driver download: https://www.realtek.com/zh-tw/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-pci-express-software
Products Descriptions
M.2 (A+E Key) to 10/100/1000M Ethernet Card, with Realtek RTL8111H Chip, RJ45 Copper Single-Port, M.2 A+E Key Connector, M.2 Network Card, Support Windows Server/Windows, Linux.
Overview
M.2 A+E Gigabit Network Card with Realtek RTL8111H Chipset, M.2 Gigabit Ethernet Module 1G Ethernet Port 1000Mbps High Speed for Desktop, PC, Office Computer. Features Integrated 10/100/1000M transceiver Supports Giga Lite (500M) mode Auto-Negotiation with Next Page capability Supports PCI Express 1.1 Supports pair swap/polarity/skew correction Crossover Detection & Auto-Correction Supports 1-Lane 2.5Gbps PCI Express Bus Supports hardware ECC (Error Correction Code) function Supports hardware CRC (Cyclic Redundancy Check) function Transmit/Receive on-chip buffer support Supports PCI MSI (Message Signaled Interrupt) and MSI-X Fully compliant with IEEE802.3, 802.3u and 802.3ab Supports IEEE 802.1P layer 2 Priority Encoding Supports 802.1Q VLAN tagging Supports IEEE 802.3az-2010(EEE) Supports Full Duplex flow control (IEEE.802.3x) Supports jumbo frame to 9K bytes Supports quad core Receive-Side Scaling(RSS) Supports Protocol Offload(ARP&NS) Supports ECMA-393 ProxZzzy Standard for sleeping hosts System Requirements Windows ME,98SE, 2000, XP, Vista, 7, 8 and 10 32-/64-bit Windows Server 2003, 2008, 2012and 2016 32 -/64-bit Linux, MAC OS and DOS Package Contents 1 x M.2 A+E Key To Rj45 Gigabit Ethernet Network Card (Main card & Daughter card) 2 x Connecting Cable 1 x User Manual 1 x Low-profile bracket Note: Contents may vary depending on country and market. What is this? The PCIe Gigabit Network Card is used to add a high-speed wired network connectivity option to a desktop computer or server. It is commonly used in situations where a stable and fast Ethernet connection is required. Are there any advantages of the product? The gigabit network card supports speeds up to 1000 Mbps, providing significantly faster data transfer rates compared to standard Ethernet connections. It ensures a consistent and uninterrupted network connection, reducing the chance of signal interference. How to use it? Steps of installation: 1. Open your computer case and identify an available PCIe slot; 2. Remove the protective coverings from the network card and align it with the PCIe slot; 3. Once the card is properly inserted, use the screw or latch provided with your computer case to secure the network card in place. What should I notice? Before installing the network card, make sure to shut down your computer properly and disconnect the power cord.