Extender SATA 22PIN cable for HDD SSD
The Serial ATA data and power combo extension cable for HDD is Used for SATA (serial port) hard disk and SATA optical drive, as well as other SATA interface equipment.
This 22-pin SATA Extension custom cable assembly contains both 15-pin Power and 7-pin Data with Male and Female connections. It allows you to extend the distance/placement of Slimline SATA drives within a tower-style computer case by 1 Feet - in turn making it easier to position your Slimline capable peripherals (drives, etc.) as needed. With support for full Serial ATA capability (data transfer speeds up to 300 MBps), this high-quality Slimline extension cable provides you with the connections you need to get your Slimline SATA devices up and running.
Specification:
Type: SATA 7+15 extension cord, SATA power cord
Interface type: SATA7+15 male to female
Wire core material: thick copper
Wire coat material: PVC
Cable length: 50cm
Features:
SATA power supply and data line, one is the male head, one is the female head, now Many HD players have a connected SATA interface, you can use this wire, directly connected to the device and the hard disk, very convenient.
Customer questions & answers
QUESTION: Can I daisy chain several of these together to make a longer cable?
ANSWER: I wouldn't do that. You can run into timing errors if the cable gets too long and/or if there are too many junctions in the run. Remember, each junction causes its delays. Better to just buy the longer cable first
QUESTION: 3.3V wire?
ANSWER: on the large wire...Serial ATA 26 AWG AWM STYLE 2725 80 DEGREE C - 30V VW-1
All small wires say 300V
QUESTION: Is it easy to break apart the data and power connectors on the female side?
ANSWER: I don't see why u would break them apart! Have a good look at our web, you can find connectors with separate power and data connectors.
QUESTION: I want to purchase a 1-meter length, could you make them?
ANSWER: of course, we are a professional cable manufacturer and support customize.
Feedback
"Used it to extend the connection for my hard drive on my laptop - so I could swap hard drives without re-closing or turning over my laptop each time !! Worked great !!!"
"I used this extension to clone a laptop hard drive to a new M.2 drive. My Dell laptop will not accept both an M.2 drive and the putt-putt 2.5" HD (the design has them existing in the same physical space - great design, NOT!) so it is either one or the other. The extension allowed me to install the M.2 and extend the HD external from the case so I could perform the clone and upgrade to the M.2 NVMe drive. Awesome!"
"I have a couple of external drop-in devices for testing RAW 3.5" SATA hard drives. The problem is, I wanted to test a couple of server drives while they were in their hot-swap trays and this won't fit in my drop-in device. The cable worked perfectly to plug into the drop-in bay and then to the drive for testing."
"Works great for installing a 4TB HD external to a PS4. It isn't pretty but it works. One launch day unit I bought a spare face plate to cut through. On both units, I used a small zip-tie to secure the cable. Have to Mod external HD case to allow for the connector."
"My MB has lots of SATA2 sockets, and I have lots of bare drives that I swap in as needed. Up until now, I had to find both a power plug and a SATA plug before I could have another SATA drive.
Now, It's easy just to find the one cord and plug in the drive.
Also, I have my computer two feet away from my desk, and my power and SATA cords were inconvenient to reach. Now I can attach any external SATA easily, without leaving my chair."
"I bought this to use as an extension to connect an extra 2.5" laptop hard drive to a SATA/IDE to USB 3.0 adapter. Before using this extension, when I connected the drive directly to the 3.0 adapter there was a noticeable flex at the SATA connection points due to height differences that would eventually cause damage to the drive. This extension relieves this pressure by giving me about 18" of distance between both devices."
"I was looking for something to simplify switching Optical drives on my computer, I have room to use up to two at the same time but sometimes I need the BR, others the DVD, and others the DVD for extended double-layer discs.
So I used to open my case each time and it was not fun to do that, so now with this cable I'm able to power off my computer, slide the bottom optical unit, take it out of the case, unplug this cable, and attach the other optical drive I'm needing, so in less than 5 minutes I have the change complete without open the case.
So this cable is a great solution to perform a process like the one I have to do in my particular scenario."
|
