Pitch 2.50mm JST XH With Lock Type Wire To Board Connector wire harness

Contact Pitch:                                                               2.50mm/with locking

No. of Contacts:                                                            2 to 16 positions

Current:                                                                        3A (AWG #22 to #28)

Compatible:                                                                  Cross JST-XA Connector Series

Voltage Rating:                                                              250V

Temperature Range:                                                      -20°C~+85°C

Contact Resistance:                                                      20m Omega Max

Insulation Resistance:                                                   1000M Omega Min

Withstanding Voltage:                                                   1000V AC/minute

Pitch 2.50mm With Locking JST-XA type wire to board connector wire harness

A secure locking device prevents accidental disconnection.

The header wafer is made of solder crack preventive material, glass-filled PA66 nylon. Header pins are round and reflow-treated, which provides low insertion force.

Shrouded headers on radial tape are also available. Headers with polarizing bosses are also available.

• Locking device

The housing has a locking device to securely hold the header, preventing accidental disconnection because of external forces that might result from the routing of wires during assembly process or of vibration.

• Solder crack preventive material

Header wafer is made of glass-filled PA66 nylon thus effective against the solder crack problem.

• Low insertion force

Header pins are round and reflow-treated, which provides low insertion force.

• Insertion guide mechanism

Header has housing insertion guides for easy and secure insertion.

• Applicable to automatic board mounting machine

Radial taped or stick-mounted headers are also available for automatic component insertion machine.

• Polarizing boss

Headers with polarizing bosses are available.

• RoHS Compliant

1>Cheap.

2>Solid connection.

3>Custom cable length.

4>Custom cable color.

5>Easy to connect/disconnect hardware.

6>Any combination of male/female connectors.

1>Connect sensors to your Arduino board.

2>Connect a breadboard to your Arduino board.

3>Connect other hardware PCBs.

4>Wire hardware in a final product.

5>Others.