PCIe to 10 Ports SATA Expansion Card

PCIe to 10 Ports SATA Expansion Card


  • This 10 Ports PCIE SATA CARD allows you to add 10 SATA 3.0 6Gbps devices to your computer. No need to drive, plug, and play.
  • Compatible with PCI-Express X1 /X4 /X8 /X16 slots.(Recommended under PCI-E 3.0, faster use)
  • ASMedia ASM1166 Chip, with heat sink, long-lasting high-temperature resistance, high-speed, and stable transmission.
  • Compatible with Windows/8/10/Ubuntu/Linux. Support SATA interface hard disk/optical drive/SSD solid state drive.
  • Compatible with SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps), Comply with PCI-Express 3.0 specification and backward compatible with PCI-Express 2.0.

Product Detail

Product Tags

Technical Specifications
Warranty Information
Part number                                                         STC-EC0059

Warranty                                                              3-years

Connector Plating                                                Gold-plated
Physical Characteristics
Port                                                                      PCIe 3.0 x1

Color                                                                    Black

Interface                                                               SATA

Packaging Contents
1 x PCI-E to 10 Ports SATA Expansion Card

1 x 5 ports 15pin SATA power splitter cable

10 x SATA 7P Cable

Single gross weight: 0.60 kg                                    

Products Descriptions

PCIe to 10 Ports SATA Expansion Card, PCIE SATA Card 10 Port with 10 SATA Cable, 6Gbps SATA 3.0 Controller PCI Express 10 Ports Expansion Card with Low Profile Bracket, Support 10 SATA 3.0 Devices, Compatible with Windows, MAC, Linux System.



PCIE 1X SATA Card 10 Ports, 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-Raid, Support 10 SATA 3.0 Devices, with Low Profile Bracket and 10 SATA Cables.



Product name: 10-port SATA3.0 expansion card

Product interface: PCI-E 1X

Product chip: ASM1166

Support system: Windows 8 / Windows10 / Ubuntu /Linux.

(Synology can only recognize 4 hard drives; WIN7 users are not recommended to buy)



1. Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0

2. Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.

3. Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s

4. Support hot swap.

5. Compatible with SATA6G, 3G and 1.5G hard drives

6. Motherboard applicable slot PCI-E 1X and above

Note: RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.

Speed description information:

1. Use SATA3.0 data cable to achieve the best results.
(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the fastest speed.)

2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.

3. Motherboard BOIS setting: SATA mode should be changed to AHCI.
Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
The fastest speed of PCI-E 2.0 is 380-450 m/s.
Different computer configurations and SATA SSDs have different speeds.

If the detection is incomplete or unstable, please contact us to send the driver.


Packing List:

PCIe 1X to 10 Ports SATA 3.0 card *1

5-port 15pin SATA POWER splitter cable *1

Low Profile Bracket *1

SATA cable *10



  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !