Factory source Usb 3.1 To Usb C Printer Cables Custom - USB SATA Adapter USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter for 1.8 HDD 50CM – STC-CABLE

Our workforce through professional training. Skilled professional knowledge, solid sense of service, to fulfill the services demands of consumers for 6 Ft Transparent Usb 2.0 Cables , Usb 2.0 Adapters Custom , 6 Ft 3.5mm Stereo Audio Cables , We believe in quality over quantity. Before export of the hair there is strict quality control check during treatment as per international quality standards.

Factory source Usb 3.1 To Usb C Printer Cables Custom - USB SATA Adapter USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter for 1.8 HDD 50CM – STC-CABLE Detail:

Technical Specifications
Warranty Information
Part number STC-BB028 Warranty 2-Years
Hardware
Bus Type USB 3.0 Chipset ID ASMedia - ASM1153E Compatible Drive Types SATA Drive Size 1.8in Fan(s) No Interface USB 3.0 Number of Drives 1
Performance
Type and Rate USB 3.0 - 5 Gbit/sSATA III (6 Gbps) General Specifications Max power of the attached drive is 900 mA Max Drive Capacity Currently tested with up to 2TB 5900 RPM hard drives UASP Support Yes
Connector(s)
Connector A 1 -SATA Data & Power Combo (7+7+2 pin) Receptacle Connector B 1 -USB Type-A (9 pin) USB 3.0 Male
Software
OS Compatibility OS independent; No software or drivers required
Special Notes / Requirements
Cable will work only with 1.8″ SATA drives2.5″/3.5″/5.25″ drives are not supported
Power
Power Source USB-Powered
Environmental
Humidity 40%-85%RH Operating Temperature 0°C to 60°C (32°F to 140°F) Storage Temperature -10°C to 70°C (14°F to 158°F)
Physical Characteristics
Cable Length 9.7 in [500 mm] Color Black Connector Style Straight to Straight Product Weight 1.4 oz [41 g] Wire Gauge 28 AWG
Packaging Information
Package Quantity 1Shipping (Package) Weight 2.2 oz [61 g]
What’s in the Box
Included in Package 1 – USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter
Overview
The STC-BB005 USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter allows you to contact any standard 1.8" SATA hard drive to your computer via USB 3.0 port at speed up to 5Gbps. It's ideal for you to backup files or upgrade your notebook hard drive. The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details. This portable adapter features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Plus, the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosure. Perfect for easy drive access for data migration, drive cloning and data backup applications. The STC-BB028 is backed by a Stccable.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing, UASP also shows an 80% reduction in required processor resources Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive. The Stccabe.com Advantage Maximum portability with cable-style adapter, and no external power adapter required Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported host Take advantage of USB 3.0-enabled laptops or desktops with UASP for faster transfer speeds Create an external storage solution on the go, for desktops, laptops or Ultrabook™ computers Access any 1.8″ hard drive or solid state drive from any USB enabled computer, for data migration or drive cloning Back up important data to an external storage device Retrieve data from an old SATA drive Use with an SSD drive to externally upgrade your laptop hard drive via USB 3.0

Product detail pictures:

The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for Factory source Usb 3.1 To Usb C Printer Cables Custom - USB SATA Adapter USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter for 1.8 HDD 50CM – STC-CABLE, The product will supply to all over the world, such as: Jordan, French, El Salvador, We take measure at any expense to achieve essentially the most up-to-date equipment and approaches. The packing of nominated brand is our a further distinguishing feature. The items to assure years of trouble-free service has attracted a great deal customers. The solutions are obtainable in improved designs and richer assortment, they're created scientifically of purely raw supplies. It readily available in a variety of designs and specifications for your selection. The most recent kinds are a great deal better than the preceding one particular and they are quite popular with lots of prospects.

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.