90 degree USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter

Part number                                                         STC-EA008-B

Warranty                                                              3-years

Cable Shield Type                                               NON

Connector Plating                                                Nickel-plated

Number of Conductors                                        NON

Connector B                                                        1 -  USB 3.1 A-Key 20 Pin Front Panel Female Header

Color                                                                    Black

Connector Style                                                   90 Degree Angle

Wire Gauge                                                          NON

USB Front Panel Adapter, 90 degree USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard.

90 degree USB 3.0 (3.2 Gen 1) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter.

USB C Front Panel Header Adapter, Coverts 19-pin IDC USB 3.0 female port into 20-pin USB 3.1 E Type (A-Key) port for USB 3.1 Type-C or Type-A connector port capability.(USB 3.0 to type e adapter)

*IMPORTANT NOTES:

1.input signal is superspeed USB 3.0 5Gbps max .connect speed will limited in 5Gbps max. Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 IDC sockets.

2.Even state-of-the-art motherboards with Intel 2066 or AMD AM4 sockets do not always come equipped with a USB 3.1 header or USB-C ports in their IO.

3.Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). Because they all have PD protocol control, This may result in a power shut down to protect the motherboard and its components. Devices such as iPad Pro and other tablets should not be charged through this port.******Recommended only for signal transmission.

Product Usage:

1. The current new computer case may have a TYPE-C front interface. If the motherboard is not updated, you can use this TYPE-E adapter 20 to 19-pin expansion card to convert the motherboard USB3.0 interface to 19PIN to TYPE-E and pass the case Install TYPE-C at the end of the cable.

2. If your PCIE expansion card has an Internal USB 3.0 20-Pin Connector (internal usb 3.0 splitter), you can also use this product to implement TYPE C applications.

3.usb c header adapter Support system: WINXP/WIN7/WIN8/WIN10 32/64BIT/MAC/Linux.

4.Package contains: USB3.0 19PIN to TYP E adapter (1 pack).

Safe & easy & stable：

It can be easily inserted into the motherboard's USB3.0 IDC interface, no additional attachments. and the PCB edge is designed with rounded corners, which is not easy to hurt your hands. integrated differential signal optimization technology, stable signal, strong anti- interference ability.

installation method:

1. Please turn off the main power supply of the computer before installation, (do not operate with power on!!)

2. Match the triangular arrow (marked 1) on the TYPE-E A key socket of the adapter card with the male interface of the triangular arrow (marked 2) on the extension line.

3. Align the connector interface and insert the USB 3.0 IDC female end of the adapter into the male 20-pin USB 3.0 IDC motherboard connector (be careful not to bend the connector pins).

4. Check again whether the connecting wires and installation connectors are in place, and turn on the computer.

5. The LED working indicator lights up, indicating that the adapter has been working, and now it can help you easily connect the device with the C-type interface.

product composition:

1.Connector 1 (motherboard) : USB 3.0 Internal IDC 20 Pin MB Male Housing Header (black and blue）

2.Connector 2 (front panel) : USB 3.1 A-Key 20 Pin Front Panel Female Header

3.4-layer PCB: Differential routing.size：long-0.9 in width-0.43 in. long 0.86 in width 0.55 in. ROHS Craft.