USB SATA Adapter USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter for 1.8 HDD 50CM
- USB 3.0 to Micro SATA 7 + 9 pin connector cable;
- Suitable for 1.8″ SATA Hard Drive;
- USB 3.0 interface, support hot plug plug and play data transfer rates up to 5Gbps;
- Backwardly compatible with USB 2.0/1.0;
- Portable size, easy and convenient to carry and use
- Operating System Support: Win 98,Win ME,Win XP,Win 2000,Vista, Win 7, Linux, MAC
- Length: 50CM
|Part number STC-BB028
|Bus Type USB 3.0
Chipset ID ASMedia – ASM1153E
Compatible Drive Types SATA
Drive Size 1.8in
Interface USB 3.0
Number of Drives 1
|Type and Rate USB 3.0 – 5 Gbit/sSATA III (6 Gbps)
General Specifications Max power of the attached drive is 900 mA
Max Drive Capacity Currently tested with up to 2TB 5900 RPM hard drives
UASP Support Yes
|Connector A 1 -SATA Data & Power Combo (7+7+2 pin) Receptacle
Connector B 1 -USB Type-A (9 pin) USB 3.0 Male
|OS Compatibility OS independent; No software or drivers required|
|Special Notes / Requirements|
|Cable will work only with 1.8″ SATA drives2.5″/3.5″/5.25″ drives are not supported|
|Power Source USB-Powered|
Operating Temperature 0°C to 60°C (32°F to 140°F)
Storage Temperature -10°C to 70°C (14°F to 158°F)
|Cable Length 9.7 in [500 mm]
Connector Style Straight to Straight
Product Weight 1.4 oz [41 g]
Wire Gauge 28 AWG
|Package Quantity 1Shipping (Package)
Weight 2.2 oz [61 g]
|What’s in the Box|
USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter
USB3.0 to Micro SATA 16Pin Hard Drive converter
The STC-BB005 USB 3.0 to Micro SATA 7+9 16Pin Cable External Hard Drive Converter allows you to contact any standard 1.8″ SATA hard drive to your computer via USB 3.0 port at speed up to 5Gbps. It’s ideal for you to backup files or upgrade your notebook hard drive.
The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
This portable adapter features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Plus, the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosure. Perfect for easy drive access for data migration, drive cloning and data backup applications.
The STC-BB028 is backed by a Stccable.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also shows an 80% reduction in required processor resources
Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
The Stccabe.com Advantage