DMS 59 Pin to DVI & VGA Splitter Extension cable
Applications:
- Will work on All DMS-59 video cards!
- Compatible with ALL DMS-59 video cards…will allow you to connect your DMS-59 video card to 1-standard VGA connector and/or 1-DVI connector!
- Suitable Replacement For: Foxconn P/N 31028822
- Splits your video card DMS59 Pin output to allow use of 1- DVI and 1 – VGA connected Monitor at the same time
Product Detail
Product Tags
Technical Specifications |
Warranty Information |
Part number STC-HH023
Warranty 2-Years |
Hardware |
Cable Jacket Type PVC - Polyvinyl Chloride
Cable Shield Type Aluminum-Mylar Foil with Braid Connector Plating Nickel |
Connector(s) |
Connector A 1 - DMS-59 (59 pins) Male
Connector B 1 - VGA (15 pins) Female Connector C 1 - DVI (24+5 pins) Female |
Physical Characteristics |
Cable Length 200mm Color Black Connector Style Straight Wire Gauge 28 AWG |
Packaging Information |
Package Quantity 1Shipping (Package) |
What's in the Box |
DMS 59 Pin to DVI & VGA Splitter Extension cable |
Overview |
DMS 59 Splitter Extension cableSTC-HH023 8" Black cable effectively routes high-resolution video signal from a graphics card to both DVI & VGA monitors. Offers cost-effective dual display solution. STC 8" Cable in black color transfers high-resolution video signal to both VGA as well as DVI monitors from Matrox Qid, nVidia Quadro, PNY Quadro and other DMS/LFH equipped graphics cards. DMS 59 male to DVI-I and HD15 VGA female connectors allows you to join both VGA and DVI monitors. Nickel-plated connectors prevent signal loss due to oxidation or corrosion.
Please do your own additional application research before buying, we cannot provide technical support for programmingInstructions, manuals, install disks, additional hardware, or software are not included unless specified in this listing Customer Feedback "Photo a bit unclear but it is a DMS-59. Works very well when I attached it to my DMS-59 video card output." "I use this in my computer shop, never had a problem with it so far, sturdy construction, should be fine for regular connecting and disconnecting." "Good quality cable thumb screws move properly. Thx" "It seems to be manufactured correctly and has not had an issue with it. The installation went without a hitch." FAQ Question: Attaching this to a DMS-59 connector, do you get two identical displays, or two displays that can work independently?
Answer: You should be able to do either, the card you connect it to may limit it though.
|