SATA 3.0 III SATA3 7pin Data Cable 6Gbs Right Angle Cables White nylon
- SATA revision 3.0 (aka SATA III) provides up to 6 Gbps data throughput
- Straight-through connector on one end, 90-degree connector on the other
- Includes locking latch on each end of the cable to ensure it doesn’t work itself loose
- Backwards compatible with SATA revision 1 and 2 (aka SATA I and SATA II)
|Part number STC-P043
|Cable Jacket Type Nylon|
|Type and Rate SATA III (6 Gbps)|
|Connector A 1 - SATA (7 pin, Data) Latching Receptacle
Connector B 1 - SATA (7 pin, Data) Latching Receptacle
|Cable Length 18 in [457.2 mm]
Color White nylon
ProductWeight 0 lb [0 kg]
|Package Quantity 1Shipping (Package)
Weight 0.1 lb [0 kg]
|What's in the Box|
SATA 3.0 III SATA3 7pin Data Cable 6Gbs Right Angle Cables HDD Hard Disk Drive Cord with Nylon Premium Sleeved
sata 3 Right Angle Cables White nylon
This 18in right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature.Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases.The right angled SATA cable supports high speed data transfers up to 6Gbps, and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by Stccable.com's Lifetime Warranty.Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps.
While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers.
One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.
The Stccabe.com Advantage