FTDI USB to rs485 Cable

FTDI USB to rs485 Cable

Applications:

  • USB-RS485 converter cable provides a USB to RS485 serial interface with customized end connectors. Entire USB to RS485 translation protocol handled by the electronics over-molded in the cable
  • ESD Protection for RS-485 I/O’s ±15kV Human Body Model (HBM) ±15kV EN61000-4-2 Air Gap Discharge ±8kV EN61000-4-2 Contact Discharge
  • EIA/TIA-485 communication interface with low power requirements. Overmolded FT232R chipset provides single chip USB to asynchronous serial data transfer interface. Works with all Windows and Mac OS versions
  • Visual indication of Power and Tx/Rx data traffic via LEDs in the transparent USB connector


Product Detail

Product Tags

Technical Specifications
Warranty Information
Part number                                                                  STC-PP016

Warranty                                                                       2 years

Hardware
Connector Plating                                                         Nickel
Connectors
Connector A                                                                  1 - USB Type A (4pin) male

Connector B                                                                  1 - Open

Physical Characteristics
Cable Length                                                                6 ft [1.8 m]

Connector Style                                                            Straight

Product Weight                                                             0.4 lb [0.2 kg]

Packaging Information
Package Quantity                                                         1Shipping (Package)

Weight                                                                          0.4 lb [0.2 kg]

What's in the Box

FTDI USB to rs485 Cable

Overview
 

FTDI Chip usb to RS485 Cable

Features:

The cable works with all Windows and Mac OS versions including the latest Windows 10 and Mac OS X 10.12(Sierra). The USB-RS485 cable is a USB to RS485 levels serial UART converter cable incorporating FTDI's FT232R USB to serial UART interface IC device which handles all the USB signaling and protocols. The cable provides a fast, simple way to connect devices with an RS485 interface to USB. This cable has 6 outputs: GND(Black), Data-(Yellow), 5vPower(RED), Terminator1(Brown), Data+(Orange), Terminator 2(Green). In the cable, there is a 120 ohm resistor connected in between Terminator 1 and Terminator 2..

1. USB RS485 adapter
2. USB2.0. full speed 12M support
3. FT232 USB RS485 cable, compatible with USB-RS485-WE-1800-BT
4. With 2 LEDs for data transfering
5. Red-VCC(5v),Black-GND,White - Data+, Green - Data-
6. FT232RL + SP485LEEN chip
7. Support Android, Support Win 8,8.1, Win 7, XP, 2000, Linix, Mac OS
8. Integrated 1024 byte EEPROM, support Vendor ID re-write,support Mprog3.5
9. Support FTDI VCP driver and D2XX driver
10. Half duplex, non-isolated
11. 300 ~ 1Mbps baud rate
12. Up to 5km distrance transfering
13. 28AWG *4 core + foil, copper, PVC jacket, black, OD=3.8mm
14. We have 4 core with drain wire cable, but need your message, otherwise, we will send standard 4C+AL cable
15. 1.8m in length.
16. ABS USB housing, openable for testing
17. RoHS, CE, 100% double test
18. PE zipper lock bag for each

 

About FT232RL

The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.

 

1. Single chip USB to asynchronous serial data transfer interface.
2. Entire USB protocol handled on the chip - No USB-specific firmware programming required.
3. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
4. Fully assisted hardware or X-On / X-Off software handshaking.
5. Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
6. In-built support for event characters and line break condition.
7. New USB FTDIChip-ID? feature.
8. New configurable CBUS I/O pins.
9. Auto transmit buffer control for RS485 applications.
10. Transmit and receive LED drive signals.
11. New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
12. FIFO receive and transmit buffers for high data throughput.
13. 256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data 14. throughput.
15. Adjustable receive buffer timeout.
16. Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
17. New CBUS bit bang mode option.
18. Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product 19. description strings.
20. Device supplied preprogrammed with unique USB serial number.
21. Support for USB suspend / resume.
22. Support for bus powered, self powered, and high-power bus powered USB configurations.
23. Integrated 3.3V level converter for USB I/O .
24. Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
25. True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
26. High I/O pin output drive option.
27. Integrated USB resistors.
28. Integrated power-on-reset circuit.
29. Fully integrated clock - no external crystal, oscillator, or resonator required.
30. Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
31. UART signal inversion option.
32. USB bulk transfer mode.
33. 3.3V to 5.25V Single Supply Operation.
34. Low operating and USB suspend current.
35. Low USB bandwidth consumption.
36. UHCI / OHCI / EHCI host controller compatible.
37. USB 2.0 Full Speed compatible.
38. -40°C to 85°C extended operating temperature range.

 


  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !