Extender VGA male to RJ45 Network Adapter

Extender VGA male to RJ45 Network Adapter


  • Color: Black Connectors: VGA male / RJ45 Ethernet port female
  • Applications: Computer, DVR, media center, game consoles
  • Allow transmitting signal between VGA video ports for distances up to 100′
  • Transmit signals between your VGA video ports over CATS, CAT5E, and CAT5 CAT6 RJ45 network cables
  • Connect your personal media devices to a larger system, such as a monitor, for the ultimate viewing experience

Product Detail

Product Tags

Technical Specifications
Warranty Information
Part number                                                                 STC-FF031

Warranty                                                                      Lifetime

Connector Plating                                                         Nickel
Connector A                                                                  1 – VGA (15 pin, High Density D-Sub) Male

Connector B                                                                  1 – RJ45 Female

Physical Characteristics
Connector Style                                                             Straight

Product Weight                                                              0.5 lb [0.2 kg]

Packaging Information
Package Quantity                                                          1Shipping (Package)

Weight                                                                            0.5 lb [0.2 kg]

What’s in the Box

Extender VGA male to RJ45 Network Adapter


VGA RJ45 Network Adapter

VGA, Video Graphics Array, / D-Sub interface; VGA interface is a D-type interface, the use of asymmetric distribution of 15pin connection, a total of 15-pin, divided into three rows, each row of five holes is the most widely used graphics card Interface type, the vast majority of graphics cards are equipped with such an interface. It transmits red, green and blue analog signals as well as sync signals (horizontal and vertical signals)

Package including: 1 Pack VGA Male to Female Extender Adapter

Used Range: 20m/ 66ft

Transmits signals up to 100 FT

Support Resolution: 720p, 1080i, 1080p

This Extender Adapter for through the CAT5/CAT5e/CAT6 Ethernet Cable,to extend the display device VGA to RJ45 extension cable, through the cable to extend the VGA signal

Save money by using a CAT5 cable versus a VGA cable

Makes running cables easier due to RJ45 being thinner

Customer Feedback


“First time I plugged it in, I got nothing. I wasn’t impressed, but not surprised either. Two completely unlabeled, identical baluns, in a generic package?
Then I waited a week, and tried it again. Whoah, they do work! My first test used the graphics card drivers to force the known correct resolution to my monitor; after that, though, I found it would auto-detect on a monitor (1920×1080@60p) or a projector (1024×768@60p), and I could adjust the resolution as needed. It appears to be reversible, too – no Tx/Rx side. Finally, it works with decent ethernet cables at least 25ft long: I tried 10′ (good), 25′ (good), and 10+25 with a joiner (also good, but YMMV). It did not seem to work with a VGA gender-changer-extender on the end, but at this price that’s fine.”


“Really works well! I used these with a 25′ CAT6a jumper without an issue. In fact, I ordered more! It’s much easier to run CAT6a than long VGA cables. I’m not sure what the overall range is, but for my purposes, this is a nice solution.”


“Performed far better than I expected, some solid UTC cable has been a bit tricky to work with, I assume the multiple uses we put the same cables to are not easy on the solid cables.”

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !