Extender VGA Female to RJ45 Network Adapter
- Transmit signals between your VGA video ports over CATS, CAT5E, and CAT5 network cables.
- Transmits signals up to 100 FT.
- Requires no external power
- Connects VGA female to RJ45 male
- Easy and Convenient to use
|Part number STC-FF030
|Connector Plating Nickel|
|Connector A 1 – VGA (15 pin, High Density D-Sub) Female
Connector B 1 – RJ45 Female
|Connector Style Straight
Product Weight 0.5 lb [0.2 kg]
|Package Quantity 1Shipping (Package)
Weight 0.5 lb [0.2 kg]
|What’s in the Box|
VGA RJ45 Network Adapter
“This is a great product if you need to extend a VGA signal. I needed about a 130′ extension. When I first hooked them up they didn’t work despite my having tested the network cable and having it pass. I couldn’t get a signal on the monitor. After much troubleshooting I discovered the equipment being connected must have a common electrical ground or you must provide one. When I discovered that was the problem It immediately worked.
“Purchased this for use in my church for our overflow projector, I bought this to avoid a (greater than) 150ft cable run for a VGA display. This little device works perfect well. It allows me to run cheaper (and easier) cat6 cable to the remote display. I ran about 150ft of cable to the remote location. There is no sign of image degradation on the remote display. I see no noise, scrolling lines, interference, or anything else that would indicate a signal problem. I’m only running at 1024×768 though. I don’t know how it would perform at higher resolutions. I highly recommend this unit and will definitely buy more for future needs.”
“I used this for a production where we needed to extend video at about 200′ over an older network. The units are solid and just “plug and play” for the most part. I noticed some quality loss when the cables were wrapped tightly but this did not extend to when I ran the cables during the installation.”