Warranty                                                                      3-year

Connector B                                                                 1 - SATA (7 pin, Data)  Receptacle

Color                                                                             Blue

Connector Style                                                            Straight to Right Angle with Latching

Product Weight                                                             0.4 oz [10 g]

Wire Gauge                                                                   30AWG

Weight                                                                            0.5 oz [15 g]

18in Latching Round SATA to Right Angle SATA Serial Cable

SATA Cable 90 Degree 

For many customers, one of the biggest disappointments when installing or updating graphics cards is to find that the cards block SATA on their motherboard. This is still a common occurrence as motherboards are built on the assumption that users with very powerful graphics cards do not need to use all the SATA connectors while users with lots of SATA drives usually do not need to install cards long. SilverStone engineers, who are used to creating products without any compromise, such as the cases in which they offer first-quality cooling with minimal noise, have accepted the challenge of designing a cable that could allow SATA connectors to be used even in the case where long graphics cards are installed. After months of research and development, CP11 was conceived, a revolutionary SATA cable. It has an extremely low-profile connector and is just slightly higher than the SATA connector on the motherboard to free up any card you might want to install.

SATA iii cables are thin, Straight SATA to SATA 6Gb data cables connected to motherboards or host controllers to target SAS/SATA hard drives, SATA SSD, HDD, CD Driver, CD Writer, Note: these 12-inch SATA cables are SATA 3 data cable only, does not provide power for your hard drive. The drive must be powered separately

SATA cable/SAS cable supports up to 6Gbps Data transfer rates, quickly upgrading your computer for expanded storage, backward compatible with SATA I and SATA II hard drives. Data transfer speed is limited by the rating of the attached equipment.

90-degree SATA to SATA 7 Pin Female design, built with 12G high-speed thin SATA cable for better signal performance, SATA cables are labeled P1 to P5 for easy routing for different SATA systems or RAID configuration, making for better cable management in tight space, each SATA connector with Locking latch for secure connection.

6Gb SATA cable supports all popular SATA-equipped devices in the market with SATA HDD, SSD, CD Writer, and CD Driver. Widely Compatible with 2.5” SSDs, 3.5” HDDs, optical drives, RAID controllers, embedded computers, and controllers, do not need any software installation