FPV HDMI Male HDTV FPC Flat Cable
Applications:
- Available length: 20CM (Approximate 7.87 inches 0.65ft);Super soft ribbon cable for brushless gimbal handhold gimbal dsrl gimbal FPV ground monitoring FPV aerial photography ect
- Super soft and very light .only 5g black low profile.FFC HDMI Flat Slim Thin HDMI cable full size HDMI 20CM
- Compatible with RED BMCC FS7 C300.Can also use on TV and STD
- strong anti-interference capacity.Gold plated pins.good quality..For some equipments or cameras, it might not support 4k, please switch to 1080P
- Chose any connector assembly you need
Product Detail
Product Tags
Technical Specifications |
Warranty Information |
Part number STC-DD089
Warranty 2-years |
Hardware |
Connector Plating Gold |
Performance |
Maximum Digital Resolutions 1080P |
Connector(s) |
Connector A 1 - HDMI/Mini HDMI/Micro HDMI (male/female) Connector B 1 - HDMI/Mini HDMI/Micro HDMI (male/female) |
Physical Characteristics |
Color Black
Connector Style Straight ro Angle Product Weight 4.2 oz [118 g] |
Packaging Information |
Package Quantity 1Shipping (Package)
Weight 4.4 oz [125 g] |
What's in the Box |
FPV HDMI Male HDTV FPC Flat Cable |
Overview |
internal HDMI cableFriendly reminder:
SPECIFICATION LISTS12 types of HDMI ends:
Customer Feedback
"This is the perfect 'internal' HDMI cable when you have a small project that needs a very low profile HDMI cable. It's length was more than enough for my retropie handheld build and not too long where I had excessive excess. I like that one of the ends is angled, because it fit perfect into a 5 inch TFT display without extending too far beyond the border of the display. The cable is very thin, but sturdy enough to snake it though a small project box without any trouble. I would only use this cable on a project that the cable was going to be enclosed, and not at a hinge where the cable would be bending constantly."
"Was wall mounting a display with a back facing hdmi port instead of down and this is just what I needed! You can see it pictured between the monitor and Raspberry Pi in attached photo."
"Using this cable with my GH5s to connect to an external monitor while operating on a DJI Ronin-S. The length is good, maybe a little too long but I don't mind considering the Ronin-S can randomly go into selfie mode with an accidental 3 trigger press and this gives more than enough slack to not pull on the devices. The reason it loses 1 star is that it cannot output 4k as was advertised when I purchased it, the GH5s can output a 4k signal and my monitor can display in 4k so I was looking for a lightweight HDMI cable that could handle 4k and when I purchased the cable it said 4k support. After communicating with the company directly they have updated the verbiage to be more clear. I have other HDMI cables that work perfectly with the GH5s and my monitor outputting 4k so I know it's possible, they're just not this thin and light so I'd rather stick with this one. The silver lining is that the Gh5s can downres the output to 1080p so I can continue using this cable for my purposes, but if you need it to output a 4k signal for an external recorder or some other reason, this cable isn't the one. Also, it comes in a nice plastic box that fits in my camera bag perfectly so storing and transporting is really easy."
"Our DVD player is sitting on a narrow shelf so there was no room for a normal HDMI cable to be plugged into the back. This 90 degree angled cable worked perfect. Very happy with the quality of the product."
"This is the perfect 'internal' HDMI cable when you have a small project that needs a very low profile HDMI cable. It's length was more than enough for my retropie handheld build and not too long where I had excessive excess. I like that one of the ends is angled, because it fit perfect into a 5 inch TFT display without extending too far beyond the border of the display. The cable is very thin, but sturdy enough to snake it though a small project box without any trouble. I would only use this cable on a project that the cable was going to be enclosed, and not at a hinge where the cable would be bending constantly."
|